![Seven's Pinballorama](/img/default-banner.jpg)
- Видео 218
- Просмотров 334 598
Seven's Pinballorama
Канада
Добавлен 18 июл 2011
Seven's Pinballorama is a classic pinball arcade located in Prince Edward Island, Canada. Most of the videos are pinball related but every now and then we do something else.
Don't just look at them. Check those fuses!
Don't just look at the fuse. Test it.
If you are visiting Prince Edward Island or the Maritimes come check us out. We're a few minutes outside of Charlottetown. About 30 minutes from Cavendish and the Green Gables house. Pay to enter and all machines are on free play.
What to do when it's raining on Prince Edward Island? We're a great family activity when it's is raining in PEI - which happens from time to time.
Check out our new Patreon: www.patreon.com/pinballorama
Please help this RUclips channel with a like and a subscribe (and maybe leave a comment). It helps the algorithm recommend these videos to more people.
Follow the arcade on social media:
TikTok: www.tiktok.com/@pinballorama
Twitch:...
If you are visiting Prince Edward Island or the Maritimes come check us out. We're a few minutes outside of Charlottetown. About 30 minutes from Cavendish and the Green Gables house. Pay to enter and all machines are on free play.
What to do when it's raining on Prince Edward Island? We're a great family activity when it's is raining in PEI - which happens from time to time.
Check out our new Patreon: www.patreon.com/pinballorama
Please help this RUclips channel with a like and a subscribe (and maybe leave a comment). It helps the algorithm recommend these videos to more people.
Follow the arcade on social media:
TikTok: www.tiktok.com/@pinballorama
Twitch:...
Просмотров: 222
Видео
How Much Power Does the Arcade Use? Using Emporia to track it.
Просмотров 418Месяц назад
We got the Vue Home Energy Monitor from Emporia running on the machine circuit breaker. Let's see how much power these machines draw. If you are visiting Prince Edward Island or the Maritimes come check us out. We're a few minutes outside of Charlottetown. About 30 minutes from Cavendish and the Green Gables house. Pay to enter and all machines are on free play. What to do when it's raining on ...
Seven's Pinballorama Arcade on Prince Edward Island - July 2024 Update
Просмотров 281Месяц назад
What's in the arcade right now? If you are visiting Prince Edward Island or the Maritimes come check us out. We're a few minutes outside of Charlottetown. About 30 minutes from Cavendish and the Green Gables house. Pay to enter and all machines are on free play. What to do when it's raining on Prince Edward Island? We're a great family activity when it's is raining in PEI - which happens from t...
Gottlieb EM Pinball NOT Ending the Game
Просмотров 174Месяц назад
From time to time you may find a Gottlieb EM pinball machine will not immediately end the game. Maybe it cycles a few extra times or perhaps it doesn't end at all. It's probably an easy fix. Check out our new Patreon: www.patreon.com/pinballorama Please help this RUclips channel with a like and a subscribe (and maybe leave a comment). It helps the algorithm recommend these videos to more people...
Sega / Stern Pinball Whitestar Weirdness - Game doesn't really start
Просмотров 251Месяц назад
This stumped me for a while but finally figured it out - and the solution was SO SIMPLE! Check out our new Patreon: www.patreon.com/pinballorama Please help this RUclips channel with a like and a subscribe (and maybe leave a comment). It helps the algorithm recommend these videos to more people. Follow the arcade on social media: TikTok: www.tiktok.com/@pinballorama Twitch: www.twitch.tv/pinbal...
Wiring a JAMMA harness for a 60 in 1 card.
Просмотров 1552 месяца назад
Wiring a JAMMA harness for a 60 in 1 card.
Installing a Starry Lit Apron on Big Lebowski Pinball Machine
Просмотров 3553 месяца назад
Installing a Starry Lit Apron on Big Lebowski Pinball Machine
1971 Chicago Coin Twin Rifle and arcade updates
Просмотров 3513 месяца назад
1971 Chicago Coin Twin Rifle and arcade updates
Big Lebowski pinball issues, fixes, and code update v1.13
Просмотров 5664 месяца назад
Big Lebowski pinball issues, fixes, and code update v1.13
The Big Lebowski Pinball Bowling Challenge Mode
Просмотров 3955 месяцев назад
The Big Lebowski Pinball Bowling Challenge Mode
Our Adventure Picking up The Big Lebowski Pinball machine.
Просмотров 4375 месяцев назад
Our Adventure Picking up The Big Lebowski Pinball machine.
The lower playfield in Bally Elektra pinball machine.
Просмотров 2615 месяцев назад
The lower playfield in Bally Elektra pinball machine.
Where's the pinball machine, Lebowski? (and updates)
Просмотров 2365 месяцев назад
Where's the pinball machine, Lebowski? (and updates)
Soldering Fun: Frogbro LD006a vs FNIRSI HS-01 vs Hakko FX-951
Просмотров 3926 месяцев назад
Soldering Fun: Frogbro LD006a vs FNIRSI HS-01 vs Hakko FX-951
Unboxing and Test of the FrogBro LD006A-11W 5v Cordless Soldering Iron
Просмотров 9247 месяцев назад
Unboxing and Test of the FrogBro LD006A-11W 5v Cordless Soldering Iron
How much do free play games earn in coins? Plus arcade updates
Просмотров 3317 месяцев назад
How much do free play games earn in coins? Plus arcade updates
Fixing the Eyelids on Ted - Red and Ted's Roadshow Pinball - Part 2
Просмотров 1978 месяцев назад
Fixing the Eyelids on Ted - Red and Ted's Roadshow Pinball - Part 2
Replacing ship optical sensors in Legends of Valhalla pinball.
Просмотров 2888 месяцев назад
Replacing ship optical sensors in Legends of Valhalla pinball.
Fixing the Eyelids on Ted - Red and Ted's Roadshow Pinball - Part 1
Просмотров 4048 месяцев назад
Fixing the Eyelids on Ted - Red and Ted's Roadshow Pinball - Part 1
Gottlieb Volley Pinball goes thunk thunk thunk,.. and updates
Просмотров 2718 месяцев назад
Gottlieb Volley Pinball goes thunk thunk thunk,.. and updates
Seven's Pinballorama November 2023 Update
Просмотров 4349 месяцев назад
Seven's Pinballorama November 2023 Update
Fun with Bally Medusa Pinball Zipper Flippers
Просмотров 3559 месяцев назад
Fun with Bally Medusa Pinball Zipper Flippers
Cleaning up a late 70's Maruhon Pachinko (パチンコ) machine
Просмотров 2519 месяцев назад
Cleaning up a late 70's Maruhon Pachinko (パチンコ) machine
More American Pinball Legends of Valhalla Weirdness
Просмотров 2659 месяцев назад
More American Pinball Legends of Valhalla Weirdness
Replacing the eyelids - Red and Ted's Roadshow pinball.
Просмотров 2339 месяцев назад
Replacing the eyelids - Red and Ted's Roadshow pinball.
Fixing blown fuse and transistor on Legends of Valhalla pinball machine
Просмотров 3529 месяцев назад
Fixing blown fuse and transistor on Legends of Valhalla pinball machine
Figuring out a Williams Big Guns pinball machine switch issue
Просмотров 3589 месяцев назад
Figuring out a Williams Big Guns pinball machine switch issue
Was just here for the 1st time with my Dad and had a blast! Definitely plan on coming back to play some more.
Making the money 💵
Did you ever try screaming at it, kicking it, and smacking it? Usually works for me.
That was the first thing I tried.
Really enjoyed watching these q&a videos, looks like an amazing place you have there 😁
Thanks. It's been a fun project. I'll probably do another Q&A in a bit and see how things have changed.
@@SevensPinballorama look forward to it, I've been watching loads of your videos recently, have really enjoyed your escapades at the arcade 😁
Brawndo, it's what plants crave!
Tive algumas eletromecânicas são otimas
Meus favoritos são eletromecânicos. Eu amo Royal Flush.
@@SevensPinballorama tive big brave, four milion, apache e uma de baralho esqueci o nome
Aw rats... Audio dropped out as you were talking about your car woes (26:41). And returned just at the end of the poor roadkill chat (28:34).
Copyright issue with the music in the background. We had to mute it.
@@SevensPinballorama Aha! Guess I’ll just need to watch live instead.
hows it holding up after 6 months? does it still work well?
I ended up not keeping it and gave it away. I found holding the button to heat it up slowed me down. I'd rather have the iron heat up and hold temp so I can solder something, position another wire, solder that, position another, solder that. With the Frogbro it had to heat up each time. It's good if you only need to solder something every once in a while.
What did you use forn he splitter? Male stereo to dual female stereo (TRS) or male stereo to dual female mono (TS)
SEVEN"S PINBALLORAMA, Why do pinball games use a combination of Slow Blow and Fast Blow Fuses?
Safety for the circuit they're running. Some times you want things to pop right away. Other things can handle a little power fluctuation.
@@SevensPinballorama But how do you know if a circuit can handle power fluctuations which would take a Slow blow? The Fast Blow circuits can't handle power fluctuations for what reasons?
@@SevensPinballorama It doesn't say in the pinball game service manuals what "determines a circuit" to use a slow blow or fast blow fuse, which the designers choose to use a slow blow compared to using a fast blow or vise versa for reasons
Sorry. I misunderstood. I thought you meant in general why use one over the other. For replacing the fuse in a game, the manual should tell you if it's slow or fast blow.
Thank you for making this analysis, really wholesome ♥
No problem 😊 It was fun to make and test actually.
I have a data East The Simpsons machine. The left flipper moves very slow. Any suggestions?
With the power off, manually move each flipper. Do they feel the same or does one feel stiffer than the other?
If it were me? I'd be looking at all the funding the governments are throwing around for renewable energy systems these days. As a business you can write the entire thing off. No shortage of wind on that island that is for certain.
If I owned the building - or had a 15 year lease - I could solar the roof. Small scale wind turbines don't produce well enough, but lots of solar rebates.
Thanks for the reminder. And some of the fuses are hot when the game is off but still plugged into the wall. Ouch!
I always say pull and test the fuse cause they can blow deep in the side.
That's shocking! 3:30 😀
Make sure your new fuses are up to the job. ruclips.net/video/B90_SNNbcoU/видео.html
SEVEN I NEEEEEED YOU!
Ruh-roh. Is Hurricane being difficult?
@SevensPinballorama That Ferris wheel damn near defeated me. I got it tho. That dang plastic under the ramp over the screws that hold the ferris wheel down. How did they think someone was going to get to it without disassembling the entire game???
@SevensPinballorama wish I could post a picture here of what a former owner or tech did to my ferris wheels. Some people 🙄
Send it on facebook.
@@SevensPinballorama sent. Under one of your posts
Cooper and Andrews brand from texas is good...but Mr Cooper died so its just Andrews now
That's cheap! I expected power to cost more on an island. Love your arcade Sir! You should organize some pinball or arcade games battles, and stream them! By the way, do you also have arcade classics like Super Mario or Donkey Kong?
I want to spend more money on electricity in my home diner and pinball arcade.... So can you tell me about the light curtain in the background with the pac man etc. how big and how it works? Thanks. And yes still want a Volley, just a nice looking and fun game to play. And a FLASH too would be nice, but I'm thinking the power draw just for the FLASH light might be very expensive with all the lightning bolts on that game.
That is the Govee LED Curtain light. Actually, it's 3 of them joined together. Each panel is about 1.5m X 2m. 520 LEDs per panel. There is an app you use to load different pre-programmed "scenes", or you can make your own. If I recall you can sequence up to 5 scenes to play in a row. I keep meaning to look if there is a firmware update for this, but I forget.
@@SevensPinballorama thanks, I will look that up.
Wow! That was cheaper than I thought!
Damn radiation
🍞🐈🍞
😋
I bought a 32 channel Project 8 a few years ago from Reverb. It was packed in a clothing packing box (thin corrugated cardboard), filled with packing peanuts and a couple of patio chair cushions. Mangled the frame, I’m still trying to rebuild it. Your box opening took me right back, my heart was racing haha. I recently found a 24 channel used at an out of state Guitar Center. Arrived on a pallet (they only charged $25 for shipping!), not a scratch and in way better condition than listed. Hopefully I’ll have the 32 + 24 next to each other soon 😁.
I also developed some mods to the PSUs, trying to pick up where Tim Jones left off. Higher current handling and some protections for the outputs (plus upgraded rectifiers and beefier caps). If you’re interested in the details, and still have the console, let me know!
I just found your channel and I really enjoyed how you explained the switch matrix. I'd like to see another video where you go into it a little deeper. Thanks again,I now have a little better understanding of the switch matrix,good stuff!
I have another machine with a switch matrix issue and I'm making a video on it. This time, we'll video the troubleshooting as well. I'm hoping to have that out in a few weeks. We're in our busy season right now so finding time to make videos AND run the arcade gets thin.
Hey STEVE, what brand aerosol clear are you using here? Is it Verathane?
Varathane Premium Diamond Wood Finish - Outdoor (FYI: My name is Seven)
Ghost pepper and peanut butter? What madness is this? 😵💫
The Maritime kind.
Quick question… do you put anything in the holes before you clear? For context, I have removed everything from the top of the playfield but have not removed everything from under. I have put disposable earplugs in the holes where they fit and old bulbs in sockets but still have other holes like drop targets.
On the playfield in the video, everything had been removed. I've done machines with the bottom of the playfield still populated. I tape off things like drop targets, switches, etc. Bulb sockets have old bulbs in them.
Got it. Thank you.
Rum and butter??? Sounds good
Smoke break
On the official Qix flyer it even says "pronounced kicks".
💯
I guess that solves that. Now I just need to retrain my brain to call it that.
@@SevensPinballorama miss the livestreams. hope all is well
I just got a pin that you prolly never have.had before. Or maybe not even seen in person. Can you guess Seven? (It's modern by most standards)
Roy Clark The Entertainer? Punchy the Clown?
Do you sell your merch online?
Yes. silverballswag.com/en-ca/collections/sevens-pinballorama and www.bonfire.com/store/sevens-pinballorama/
How are the Kali going for you?
Love them
@@SevensPinballoramasuper, I just got my white version this week and had watched your videos prior to purchase, first impressions are very positive.
Big Lebowski ftw
If you ever get a Getaway, I may come over and never leave again! Lot of memories from the early 90s playing that one.
Awww....I missed the pinball extravaganza!
Thanks. I have been driving myself nuts working on a Williams Grand Prix that doesn't end the game correctly. As you say, I have replaced the coil on the game-over relay, but I guess I have to go back and inspect the switches on that relay more carefully. I think I did already. The machine is at my daughter's house in another city, so I only get to check it out every once and a while.
Might be something like this if it seems like the relay tries to close but never "latches". I run into this from time to time.
I recently had my Target Alpha not going to game over. My problem was unique in that the switch on motor 1C that provides power to the game over coil had lost it's power. More than likely a bad solder connection somewhere on the score motor...but where..? Since the power goes from the BX to the game over coil, a jumper was soldered on the BX from a switch with power to the switch that goes to the game over coil. Kind of an end around fix, but it's been working great.
So i have an alesis strike pro SE. im looking to add another cymbal, notably a splash, and i have a few questions. First off ive already have the cymbals set and and used a splitter from my tom4 rim and have gone into the settings and change change it manually to the splash cymbal i want, but my problem is i dont know how to save it. do i need to create a custom ki to get it to save?
Whoa that is super weird.
Oh man… I’m sorry your bought the pcb for no reason. Glad you found the problem though🎉
I'm actually ok with it at the end of the day. I like having a board or two floating around that fit in games on the floor. If something blows up I can swap the board. get the machine up and running quickly, and fix the old board when I have time. Also, in cases like this where it really seems like a MPU glitch, being able to swap the board can rule that out.
Yup , that’s definitely a weird one . Amazing what one loose wire can do to a machine . Glad you figured it out ! Thanks for sharing it with us !
Wow, thanks for the video.
Hello there I am analyzing your [ Seven's Pinballorama ] RUclips channel. you are making great videos but not getting that viewer according to your videos. As an SEO expert, I understand your videos are not SEO properly. basically due to not doing SEO your video does not reach a worldwide audience. Due to this, the video does not get views, subscribers, and comments. I suggest you SEO your videos properly, your channel will improve greatly. why are you not solving these problems? Your channel is not progressing due to these issues. Please let me know if you have any questions or concerns. Thanks and Regards, Mahmud
YOU found our youtube page and video and you posted the same message to our facebook account. Seems to be working to me.
@@SevensPinballoramayes
Great Video. Any advice on adding another 8” Tom and two lemon splash cymbals? Still use the splitter?
If you aren't using the rim triggers on your toms, that's the way to go with the splitters. It will give you 4 more points to add triggers.
Good stream eh? Thanks!
Thanks eh…
Recently picked up one of these machines that wasnt working and fixed it up. I dont really understand the vitriol some people seem to have for this machine online. It's quite a fun game and quite light hearted.
Hello im restoring the same mechi Do you have any of the mold casting or targets I can buy I just need the deer target
I need to make new deer targets for mine. I have everything I need to create molds and cast a few. I'm going to make a video on this so once that is out drop a comment on that video and I should have extras by then.